Long Model Printing.
Batch Printing
Overhang Printing Without Support
Auto Leveling
Upgraded Metal Conveyor Belt
High-Speed Printing with Klipper
Remote Monitoring & Control
Filament Run-Out Detection
4.3lnch Touch Screen + LED Light
Open Source Klipper
250x250x∞mm Printing Size
400mm/s Printing Speed
100% auto leveling by machine after assembled. Print head with senser , it will detect the distance with the bed platfrom , and matched with the slice setting Y offset -0.1 to -0.2mm（depand on the filament Stickiness ), then it will stick well on the belt .
Metal conveyor belt , mainly coated with PEI . Printing area is warm for sticker models on , and it is strong hardness, High models on it will not shaking. Detach model area is cold , it is easy to separate the model from the conveyor belt .
Klipper firmware/Fast printing . Pring speed is over 400 + mm/s , Powered by the Open-source Klipper system klipper firmware and designed the xy axis move very smooth, z axis is powerful with gearbox and we put it inside the roller.
Enclosure box for print high temperature filament, such as abs nylon etc. keep the model not warp up and crack
Extend roll for print long model, keep the print side sticker well , and keep the model not bent.
Wifi and Camera . It can be remote control by phone or computer, if filament enough , you can keep it working for long time even you are not behind the printer
4.3-inch capacitive touch screen and Led light , you can check the status at mid night
Built-in filament runout detection keeps your prints safe. If the filament runs out or breaks, IR3 V2 pauses automatically so you can reload and continue without wasting hours of work.
Easy assembly and Stable printing . base on auto leveling , it sticker very well, metal belt keep models no shaking , all main electronic parts design by ourself, and we use the good components on heater , thermistor ,fans , power supplier etc . After 6 month testing and adjustment, printing is quite stable now. (print a great model need with a correct slice setting).
.
Ideaformer facus on 3d printing accessorise since 2017. we sold our products to many country , we are on amazon , ebay ,aliexpress, alibaba, Temu and our website. think many 3d printer user should be used our products .
Last two years , we are start to bulid 3d printer, we are start over with ir3 and ir3 v1 , we learned from them well，and we got the experienced from customer . More than one year later, we updated to ir3 v2 . then take half an year to testing and adjusting , we made it easier and more stable to use right now.
For the belt 3d printer on the market The main issue is the leveling + braid belt , this may cause many issues, such as sticker not enough or stick too tight , high model shaking etc , then printing fail or print quality is bad . our IR3 V2 with auto leveing + metal belt , it totally solve this issue，if you need print something long stuff, ir3 v2 is a great choice
Rico Haa / CEO
At IdeaFormer, our mission is to redefine the standards of belt 3D printing. Since 2017, we’ve served global makers with precision 3D printing accessories. Building on this foundation, we ventured into printer manufacturing with a deep understanding of real user challenges.
From IR3 to IR3 V2, we’ve continuously refined our design — integrating automatic leveling and a metal belt to solve the core issues of adhesion, print stability, and ease of use.
We are committed to creating reliable, high-speed, and intelligent 3D printing solutions that empower creators to go further, print longer, and build better.
IdeaFormer empowers creators with precise, powerful tools to bring imagination to life.
Sustainability
We design eco-conscious printers with durable parts to reduce waste and support responsible making.
